BJJ Gi Category — Rash Guard

Evosoft
Custom BJJ Rash Guard

110 / 140 / 240gsm Full Sublimation Under-Gi & No-Gi Custom Design

The Evosoft is our high-performance custom rash guard, built from sublimation-ready fabric in your choice of 110, 140 or 240gsm. Engineered to be worn under the Gi or for standalone No-Gi training — fully customizable with your academy's branding, colors, artwork, and logo. Configure a rash guard, shorts or a matched set below, then send it straight to a quote.

Product Rash Guard
Weight 240gsm
Gender Male
Sleeves Short
Fit Compression fit
Shorts
Type Broad Short
Side Slits None
SKU ERG240CF
Why Evosoft

Your Design. Edge to Edge.

Sublimated print on the Evosoft rash guard running edge to edge — a red diamond lattice rising from the hem across both the front and back panels
240gsm
Evosoft · 240gsm Sublimation Fabric

Built to Perform

Sublimation printing lets your design run edge to edge — no peeling, no cracking, no fading. The 240gsm four-way stretch fabric moves with you, wicks moisture, and holds compression through the hardest rounds. Flatlock seams stay flat against the skin to prevent chafing under the Gi.

4-Way StretchMoisture WickingFlatlock SeamsEdge-to-Edge PrintAnti-Fade
Full Specifications

The Details

ProductEvosoft Custom Rash Guard
SKUERG + GSM + fit · e.g. ERG240CF (240gsm, compression fit) or ERG110LF (110gsm, loose fit)
Fabric Weight110, 140 or 240gsm (240gsm standard) — consistent across all units of a design
Fabric Composition90% polyester / 10% spandex
Stretch4-way stretch — stretches and recovers along both length and width
CustomizationFull sublimation — edge-to-edge custom artwork
SeamsFlatlock stitch throughout — no raised ridge against the skin
Inner LabellingTagless — size and care printed inside the garment
Sleeve OptionsShort sleeve / full sleeve
FitCompression fit (CF) or loose fit (LF)
Use CaseUnder-Gi layer & standalone No-Gi training
SizingXS – 3XL (male & female cuts) · Y1 – Y4 (kids)
Minimum Order10 units per design
Lead Time3–4 weeks (typical)
Country of OriginManufactured in Sialkot, Pakistan
ShippingDAP (Incoterms® 2020) · DHL or FedEx by air, or sea freight · freight paid by customer, quoted per order
Transit Time8–20 days by air · 40–50 business days sea (additional to lead time)
Same Fabric

No-Gi Shorts

Our No-Gi shorts are cut from the same 90% polyester / 10% spandex 4-way stretch fabric as the Evosoft rash guard, in 110, 140 or 240gsm, flatlock stitched and supplied tagless in the same way. Ordered together in the same weight, the two pieces take the same sublimated artwork, hold the same colour, and behave the same way in the wash — because they are the same cloth.

Evosoft No-Gi shorts in black and red, matched to the Evosoft rash guard — red diamond lattice across the hip, Gimakx waistband label and a red Gimakx monogram on the leg
90/10 · 4-Way
ProductCustom No-Gi Shorts
SKUESH + GSM + type · e.g. ESH240BS, ESH110CF or ESH240HY
Fabric Weight110, 140 or 240gsm (240gsm standard) — consistent across all units of a design
Fabric Composition90% polyester / 10% spandex — same fabric as the Evosoft rash guard
Stretch4-way stretch — stretches and recovers along both length and width
SeamsFlatlock stitch throughout — no raised ridge against the skin
Inner LabellingTagless — size and care printed inside the garment
TypeBroad short (BS), compression fit (CF) or hybrid (HY) — a broad short with a compression lining
Side SlitsNone or standard side slits (broad and hybrid shorts)
CustomizationFull sublimation — edge-to-edge custom artwork
Minimum Order10 units per design
Lead Time3–4 weeks (typical)
Country of OriginManufactured in Sialkot, Pakistan
Work We Have Shipped

A Full No-Gi Set, Built to Brief

Grizzly Jiu Jitsu came to us with a logo and a colourway and left with a matched No-Gi set — rash guard and shorts, three colours, the same claw artwork sublimated across both pieces. This is what an academy order looks like when the rash guard and the shorts come off the same cutting table.

View Size Guide → Request a Quote →
Wholesale Pricing

Price Per Unit

Volume pricing in USD. The price drops as the order grows, and the tier is applied per design.

Product10–19 units20–49 units50+ units
Evosoft Rash Guard110 / 140 / 240gsm, same price · full sublimation$25$20$15

Prices are per unit in USD and exclude shipping. Freight is quoted per order and paid by the customer under DAP (Incoterms® 2020); customs duties and import taxes are the buyer’s responsibility. Minimum order is 10 units per design, and the tier applies per design. Final pricing is confirmed in your written quotation.

Evosoft pricing and lead times on this page are current as of .

Request a Quote →
Sizing

Find Your Perfect Fit

Evosoft rash guards run XS–3XL for adults and Y1–Y4 for kids. Find your height across the top and your weight down the side — the cell where they meet is your size.

Weight (lbs / kg) ↓
Height (in / cm) →
5'1"
155
5'2"
157
5'3"
160
5'4"
163
5'5"
165
5'6"
168
5'7"
170
5'8"
173
5'9"
175
5'10"
178
5'11"
180
6'0"
183
6'1"
185
6'2"
188
6'3"
190
6'4"
193
6'5"
196
0 – 115
0 – 52
XSXSXSXSXSXS
116 – 125
53 – 57
XSXSXSXSXSXSXSS
126 – 135
57 – 61
XSXSSSSSSSS
136 – 145
62 – 66
SSSSSSSSSMM
146 – 155
66 – 70
SSSSMMMMMMMMM
156 – 165
71 – 75
MMMMMMMMMMMMMM
166 – 175
75 – 79
MMMMMMMMLLLLLLLL
176 – 185
80 – 84
MMMLLLLLLLLLLLLLL
186 – 195
84 – 88
LLLLLLLLLLLLXLXLXLXLXL
196 – 205
89 – 93
LLLLLLXLXLXLXLXLXLXLXLXLXLXL
206 – 215
93 – 98
XLXLXLXLXLXLXLXLXL2XL2XL2XL
216 – 225
98 – 102
2XL2XL2XL2XL2XL2XL2XL2XL2XL
226 – 235
103 – 107
2XL2XL2XL2XL2XL2XL2XL2XL
236 – 245
107 – 111
2XL3XL3XL3XL3XL3XL
246 – 255
112 – 116
3XL3XL3XL3XL3XL
256 – 265
116 – 120
3XL3XL3XL
266 – 275
121 – 125
3XL3XL

Heights are shown as feet/inches over centimetres; weights as pounds over kilograms.

Rash guards are cut for a compression fit — size up if you prefer a relaxed fit.

Weight (lbs / kg) ↓
Height (in / cm) →
4'4"
132
4'5"
135
4'6"
137
4'7"
140
4'8"
142
4'9"
145
4'10"
147
4'11"
150
5'0"
152
5'1"
155
5'2"
157
5'3"
160
5'4"
163
5'5"
165
5'6"
168
5'7"
170
0 – 65
0 – 29
Y1Y1Y1Y1Y1Y1Y1Y2
66 – 75
30 – 34
Y1Y1Y1Y1Y1Y1Y1Y1Y2Y2Y2
76 – 85
35 – 38
Y1Y1Y1Y1Y1Y1Y1Y2Y2Y2Y2Y2Y3
86 – 95
39 – 43
Y2Y2Y2Y2Y2Y2Y2Y2Y2Y2Y2Y2Y3Y3Y3
96 – 105
44 – 47
Y2Y2Y2Y2Y2Y2Y2Y2Y3Y3Y3Y3Y3Y3Y3Y3
106 – 115
48 – 52
Y3Y3Y3Y3Y3Y3Y3Y3Y3Y3Y3Y3Y4Y4
116 – 125
53 – 57
Y3Y3Y3Y3Y3Y3Y3Y3Y3Y4Y4Y4Y4
126 – 135
57 – 61
Y3Y3Y3Y3Y3Y4Y4Y4Y4Y4Y4Y4
136 – 145
62 – 66
Y4Y4Y4Y4Y4Y4Y4Y4Y4Y4
146 – 155
66 – 70
Y4Y4Y4Y4Y4Y4Y4

Heights are shown as feet/inches over centimetres; weights as pounds over kilograms.

Kids sizes are graded from the same compression block as the adult range. Above 5’7” or 155 lbs, order from the adult chart.

Kids garment measurements

SizeFactory codeChest width, flatChest, garmentBody lengthSleeve length
Y1YS-113.5” / 34 cm27” / 69 cm20” / 51 cm9.5” / 24 cm
Y2YS-214.5” / 37 cm29” / 74 cm21” / 53 cm10” / 25 cm
Y3YS-315.5” / 39 cm31” / 79 cm22” / 56 cm10.5” / 27 cm
Y4YS-416.5” / 42 cm33” / 84 cm23” / 58 cm11” / 28 cm

Measurements are of the garment laid flat and unstretched. Chest width is taken across the body 1” below the armhole; body length from the high point of the shoulder to the hem; sleeve length from the shoulder point to the cuff on the short-sleeve cut. Sizes step 1” in chest width and 1” in length, with a ½” step in sleeve.

Kids rash guards carry the same MOQ of 10 units per design, and sizes can be mixed freely within one design.

Matching kids shorts run Y1–Y4 on the same grade — see the Shorts tab for waist and length.

Adult shorts

SizeWaist (inches)Waist (cm)
XS27" – 29"69 – 74
S29" – 31"74 – 79
M31" – 33"79 – 84
L33" – 35"84 – 89
XL35" – 37"89 – 94
2XL37" – 39"94 – 99
3XL39" – 41"99 – 104

Order shorts by waist size — if you are between sizes, size up.

Kids shorts

SizeFactory codeWaist (inches)Waist (cm)Length (outseam)Pairs with
Y1YS-123” – 25”58 – 6413” / 33 cmY1 rash guard
Y2YS-225” – 27”64 – 6914” / 36 cmY2 rash guard
Y3YS-327” – 29”69 – 7415” / 38 cmY3 rash guard
Y4YS-429” – 31”74 – 7916” / 41 cmY4 rash guard

Waist is the body measurement, not the garment; length is the finished outseam from the top of the waistband to the hem. Waist steps 2” per size and length 1”, on the same grade as the kids rash guards.

Kids shorts share a waist band with the smaller adult sizes — Y3 matches adult XS and Y4 matches adult S — but run a shorter leg, so a junior gets the right length without the hem sitting past the knee. Above a 31” waist, order from the adult table.

Every pair has a drawstring waistband with roughly 2” of adjustment either way, so a stockier athlete can size to the waist without losing leg length.

Engineering

Performance Engineered

Full Sublimation

Your academy artwork printed edge to edge into the fabric itself. It won't peel, crack, or fade — even after years of washing and rolling.

4-Way Stretch

240gsm performance blend that moves in every direction, holds compression, and snaps back to shape round after round.

Flatlock Seams

Seams sit flat against the skin to eliminate chafing and irritation — critical for the long under-Gi sessions.

Moisture Wicking

Pulls sweat away from the body and dries fast, keeping athletes cool and grippy through high-intensity training.

Under-Gi & No-Gi

A true dual-purpose layer — wear it under the GiPro or as standalone No-Gi competition gear.

Matched to Your Gi

Design the Evosoft to coordinate with your GiPro order for a fully unified academy kit and brand identity.

Your Questions Answered

Frequently Asked Questions

Can I get a custom designed rash guard for my academy?

Yes — Evosoft rash guards can be fully sublimated with your academy's logo, sponsors, and color themes. Because we use edge-to-edge sublimation printing, your design runs across the entire garment with no limits on color count or placement.

Are Evosoft rash guards suitable for both No-Gi and under-Gi training?

Yes. The Evosoft is made from moisture-wicking, anti-bacterial, and stretchable fabric in 110, 140 or 240gsm — ideal for No-Gi sessions as standalone competition gear, and designed to sit flat under the Gi without bunching or causing discomfort during rolls.

Will the rash guard design fade or peel after washing?

No. We use high-quality sublimation printing that permanently bonds the design into the fabric at a molecular level. The colors won't crack, peel, or fade — even after years of regular washing and hard training. This is the fundamental advantage of sublimation over screen printing or heat transfer.

What is the minimum order for Evosoft rash guards?

The minimum order is 10 units per design for the Evosoft custom series. This applies to each individual design — so if your academy wants two different color schemes, each design requires a minimum of 10 units.

Can the Evosoft be matched to our GiPro Gi order?

Absolutely. One of the primary reasons academies choose Gimakx is the ability to coordinate a complete kit from one manufacturer. Your Evosoft rash guard can be designed to match your GiPro Gi in colors, logo placement, and branding — so every athlete wears a unified academy identity from Gi to rash guard.

What is the exact fabric composition of the Evosoft?

90% polyester and 10% spandex. The polyester is what the sublimation dye bonds to, which is why the print cannot crack or peel; the spandex is what gives the fabric its 4-way stretch and recovery. The weight is chosen per design — 110, 140 or 240 GSM, with 240 GSM as standard — and every unit of that design is cut from the same specification.

Is the Evosoft fabric 4-way stretch?

Yes. The 240 GSM 90/10 polyester-spandex knit stretches along both the length and the width of the cloth and recovers to shape, which is what lets the garment hold compression through a round instead of bagging at the elbows and shoulders.

What seam construction do you use on the rash guard?

Flatlock stitch throughout. A flatlock seam joins the two panels edge to edge rather than folding them over each other, so there is no raised ridge sitting against the skin — which is what prevents chafing on long under-Gi sessions and stops the seam catching under a Gi jacket.

Are the rash guards tagless inside?

Yes. We supply the Evosoft tagless, with the size and care information printed directly inside the garment instead of on a sewn-in tag. There is nothing at the neck to scratch, curl, or be cut out by the athlete, and the printed label carries your branding on a private-label order.

What fabric are your No-Gi shorts made from?

The same fabric as the Evosoft rash guard — 90% polyester and 10% spandex in 110, 140 or 240 GSM (240 GSM as standard), with 4-way stretch, flatlock seams and tagless printed inner labels. Ordering shorts alongside rash guards in the same weight means both pieces take the same sublimated artwork and behave the same way in the wash, because they are the same cloth.

How is the No-Gi shorts waistband constructed?

Our standard build is a hybrid closure waistband. We can also customize the closure to your specification — tell us what your athletes prefer and we build the waistband to match on your order.

Are the No-Gi shorts available unlined or compression-lined?

Both are available. Unlined is the single shell, worn over the athlete's own spats or compression shorts, and is the usual choice for grappling. Compression-lined has an inner compression short built into the waistband, so the garment is complete on its own. The price difference between the two is confirmed in your written quotation.

What do SKU codes like ERG240CF mean?

The SKU describes how the garment is built. E is for Evosoft, RG for a rash guard or SH for shorts, then comes the fabric weight in GSM, then the cut: CF compression fit or LF loose fit on a rash guard, and BS broad short, CF compression fit or HY hybrid (a broad short with a compression lining) on shorts. So ERG240CF is a 240gsm compression-fit rash guard and ESH110CF is a pair of 110gsm compression shorts. Quote the SKU on a repeat order and we build to the same specification.

REQUEST
A QUOTE.

We respond to all B2B inquiries within 24 hours. Minimum order 10 units. No distributors — direct from factory.

Quote — Evosoft Rash Guard

Your selection: Rash Guard · Male · Short sleeves · Compression fit · No silicone gripper · Size not selected · SKU ERG240CF

* Required fields. We reply within 24hrs. All information is kept strictly confidential.
Your request opens pre-filled in WhatsApp or your email app — review it and hit send.